Language English
About us

Joloda Moving Floor System

Technical Information Model Detail Watch the video Download Brochure Brochure in Dutch Download Press Release Resellers

The moving floor is a low profile lightweight flexible slat conveyor for trailer and dock to load and unload mixed pallet loads and unpalletised loads for high speed, high weight short shuttle operations. Loading a trailer in less than 1 minute using 3 phase or 24v electric motor gearbox drives controlled by an invertor to give matched conveyor speeds, ramp up and ramp down control for speeds of up to 30 meters per minute and 30 ton loads.

  • Just-in-time automated deliveries.
  • Demanned operation - only one man and a fork truck needed.
  • Loads and unloads at speeds of up to 30 metres per minute.
  • Dual power supply - switch between 3-phase mains and 24v - truck battery.
  • Payloads up ton 30 tons.
  • Full utilisation of payload and cube through low height and low weight moving floor design.
  • A flat slat moving floor allows you to handle any pallets, stillages or loose parcels - total flexibility!
  • Minimises product damage.
  • A fail safe manual back-up system is incorporated.

"Load and offload cargos up to 30 tons - anywhere"

Model

One man and his fork truck and the Moving Floor System - that's all you need ! 

Technical Information
  • The moving floor is a flat slatted conveyor that effortlessly moves loads forwards or backwards at the turn of a switch.
  • The floor is chain driven by a powerful water resistant motor reduction gear box that can run on either 24V truck battery or mains power.
  • The dual power facility enables you to mains load at the warehouse and battery unload at a remote site.
  • For payloads up to 10,000 kilos 3/4" roller chain is specified and for loads up to 30,000 kilos 1" chain is fitted.
  • Loading speeds can be varied up to 30 metres/minute by a simple electronic control.
  • Twin beam photo electric cells allow for automatic indexing of pallets in the trailer body.
  • The moving floor is thin and compact at just 100mm high and with a flush fitting head board you can maximise load space.
  • Used in trucks bodies operating at +60°C to -25°C.
  • The system can be retrofitted or built into new trucks, rigids or semi trailers and can be safely used in wet or refrigerated conditions and cleaned by simply hosing down.